Dougs Custom Lures Buzzin' Frog Buzz Bait

"The frog is what I run on this head ninety percent of the time anyway. I put together this pack so you're not placing a separate order just to get on the water the right way. Thread one of the frogs on, match your blade to the conditions, and you're set. Six frogs is enough to get through a full day of hard topwater fishing — and if you're going through them faster than that, you're catching fish, so that's a good problem."

Everything you need to run this bait right out of the pack. The wire form, blade, hook, and six DCL 4" Buzz Frogs are included — thread a frog on and you're fishing. No separate trailer order, no waiting. Pick your weight, pick your blade finish, and put it to work.

The 4" Buzz Frog rides on the hook with no skirt underneath. Paddle claws churn the surface behind the blade with one uncluttered profile — nothing competing for attention below the waterline. Bass tracking the bait by blade noise get a clean, natural target when they commit. The frog collapses on the hookset and exposes the point.

Hard topwater fishing burns through trailers. Six frogs per pack is enough to cover a full day without rationing — swap a torn one out at the boat, keep fishing. The same frog also runs on your bare head if you have one, so the extras don't go to waste.

The bare hook collar accepts a standard silicone skirt if you want to dress it up. Run the frog clean for a natural profile, or slide a skirt on for added bulk and water displacement. Either way, the frog stays on the hook behind it. The bare head version is in the lineup if you want to build your own color combinations from scratch.

Swap the frog early, not late. A torn or stretched frog that's still technically on the hook isn't running right — the paddle claws lose their action before the bait looks visibly beat up. When a frog stops producing on a stretch of water that should be holding fish, put a fresh one on before you move spots. You've got six in the pack — use them.

The highest-contrast combination in the lineup. Black head reads as a bold silhouette from below; gold blade thumps loud and throws warm flash. Bass locating the bait by vibration and outline in stained water or heavy cover get a clear, readable profile from both directions. This is the combination to reach for when conditions are working against visibility — low light, off-color water, thick mat cover where the bait disappears from view the moment it clears the edge.

Dark silhouette with a cooler, more subtle flash. The silver blade is quieter than gold at the same retrieve speed — less aggressive thump, more visual flash. The black head holds its silhouette strength at night and in low light, making this a strong night fishing combination when you want dark profile without the gold blade's loud thump. Also works on dock edges in clear water where bass are holding in shadow lines and a more subdued blade finish draws less attention from pressured fish.

Natural head color with an aggressive blade. The green pumpkin head reads as vegetation or a small baitfish in the strike zone — nothing alarming about the head itself. The gold blade adds the commotion and warm flash that draws fish in from a distance. This combination covers the widest range of vegetation situations — pad edges, grass mats, weed lines — where bass are keying on natural forage and you want a head that blends while the blade does the calling.

The most natural, low-aggression combination in the lineup. Green pumpkin head with a silver blade is the finesse option — subdued head color, subtle flash, no gold thump. Use this when fish are in clean water and have seen heavy buzzbait pressure through the season, or early morning when fish haven't committed to aggressive feeding yet. The silver blade still creates enough surface disturbance to draw strikes, just without the hard contrast and loud noise of the other combinations.

Start with the blade finish, then match the head. Gold blade in stained water or heavy cover, silver blade in cleaner water or when fish are pressured — that decision alone gets you most of the way there. Once you've picked the blade, the head color fine-tunes the profile. Black head for maximum silhouette, green pumpkin for a natural blend. Most days, gold blade with whichever head matches the bottom color is all the decision-making you need.

One buzzbait head — stainless wire form, cupped aluminum blade, straight-shank hook — and six DCL 4" Buzz Frogs. Thread a frog on and you're ready to fish. Pick your weight and blade finish when you order; the frogs are included regardless of the combination you choose.

The frog runs on the hook without a skirt — that's the standard setup for this bait. The paddle claws churn the surface behind the blade with a clean, single profile. If you want to add a skirt for more bulk or water displacement, the collar accepts a standard silicone skirt. The bare head version is in the lineup if you want to build entirely custom color combinations from scratch.

Depends on how hard the fish are biting and how thick the cover is. On a normal day of open-water topwater fishing, a frog holds up for several fish before it starts to stretch or tear. In heavy cover where fish are hitting it hard and the hook is punching through on every set, you'll go through them faster. Six per pack is enough to cover a full day of hard fishing without running out.

3/8 oz for most situations — calm days, moderate retrieve speeds, open water and dock edges. The frog's paddle claws add some resistance, but the 3/8 oz handles it well at a normal retrieve pace. Go to the 1/2 oz when you're fishing into wind, covering large flats at a faster pace, or when you find the bait wanting to dip below the surface at your preferred retrieve speed.

Yes. The DCL 4" Buzz Frog works on any straight-shank or EWG hook. Run it on the bare head if you have one, use it as a trailer on a swim jig, or rig it Texas-style in heavy cover. The extras from this pack aren't tied to this head — they're the same frog sold separately in the lineup.